Back
ADMETEC
DLMS protocol converter ESMB 3.2

ESMB 3.2 is a modification of ESMB 3.1 controller which is used for conversion of meter protocol DLMS/COSEM to Modbus. Controller is used for data transmission of smart meters, which use DLMS/COSEM communication protocol, to SCADA or building management systems. Same as ESMB 3.1, ESMB 3.2 can have one or two communication interfaces (20 mA current loop and/or RS485) and transmit data using RS485 or Ethernet interface.  

Technical details
Power supply, AC
90 - 264 V, 50 Hz
Power supply, DC
110 - 270 V
Consumed power
< 5 VA
Protection class
2
Galvanic isolation: Power supply <-> Communication interfaces
4000 V
20 mA current loop communication interface for meter connection
Up to 5 meters, data transmission speed 300 ... 19200 baud
RS485 communication interface for meter connection
Up to 32 meters, data transmission speed 300 ... 19200 baud
RS232 communication interface for data transmission/configuration
Data transmission speed 2400 ... 19200 baud
RS485 communication interface for data transmission
Data transmission speed 300 ... 19200 baud
Ethernet communication interface for data transmission
10/100 Base-T, RJ45 connector
Operating temperature
-20 ... +50 ⁰C
Relative humidity
5 ... 95% non condensing
Dimensions
110x75x25 mm
Similar Products
product image
Remote data reading modem MCL 5.10 Narrowband
product image
GPS NTP Network Time Server (TM1000A)
product image
Remote data reading modem MCL 5.10
product image
Current loop interface surge protection Protec